This is the genuine Fluidra replacement collector assembly with a 125 mm diameter, designed specifically for the Fluidra Europe Filter \u00d82350 commercial sand filter with a 1.2 m filter bed and a 2.5 bar pressure rating. The collector assembly sits at the base of the filter vessel and houses the lateral arms that collect filtered water while retaining the sand bed, making it a critical component for correct filter operation. A damaged or broken collector leads directly to sand bypass and poor water quality, so replacement with a genuine part is essential.<\/p>\n
This collector assembly is matched to the Fluidra Europe Filter \u00d82350 \u2013 125 mm, 1.2 m filter bed, rated at 2.5 kg\/cm\u00b2 (2.5 bar). The Europe Filter range is a large-format commercial polyester and fibreglass sand filter capable of handling flow rates of 108\u2013152 m\u00b3\/hr at the \u00d82350 size. Always verify your filter’s model reference and connection diameter before ordering, as collector assemblies are size-specific and not interchangeable across different tank diameters.<\/p>\n
As a genuine Fluidra OEM part, this collector assembly is manufactured to the exact tolerances of the original, ensuring a precise fit within the filter vessel and full compatibility with the lateral arms and underdrain system. Using non-OEM alternatives risks poor sealing, sand bypass into the pool, and potential damage to downstream equipment. Genuine Fluidra parts also support the long service life that the Europe Filter range is engineered to deliver.<\/p>\n
Installation requires draining and depressurising the filter, removing the sand charge, and accessing the underdrain from the top of the vessel. Given the scale of a \u00d82350 commercial filter, this work should be carried out by a qualified pool technician familiar with large-format sand filtration systems. Ensure the filter is fully isolated from the pump and electrical supply before starting any maintenance.<\/p>","protected":false},"excerpt":{"rendered":"