This is the genuine Fluidra collector assembly designed for the Europe Filter \u00d82350 commercial sand filter with a 160 mm pipe connection. The collector is the internal hub-and-lateral manifold installed at the base of the filter tank, responsible for gathering clean filtered water and channelling it efficiently to the outlet pipework. It is an essential structural and hydraulic component that directly determines filtration performance and flow integrity.<\/p>\n
This assembly is engineered exclusively for the Fluidra Europe Filter \u00d82350 mm with a 160 mm connection, rated to 2.5 kg\/cm\u00b2 (\u22482.5 bar) and fitted with a 1.2 m sand bed depth. The Europe Filter 2350 handles flow rates of 108\u2013152 m\u00b3\/h, making it a high-capacity commercial filter used in public pools, leisure centres, and large commercial installations. Always verify your filter model code before ordering, as collector dimensions vary across the Europe Filter range.<\/p>\n
A genuine Fluidra collector assembly ensures precise dimensional fit within the filter tank, maintaining the correct hydraulic seal between the laterals and the tank base to prevent sand bypass into the pool. Aftermarket alternatives may not match Fluidra’s tolerances, risking sand leakage, uneven flow distribution, or premature failure \u2014 particularly problematic in high-flow commercial environments. Sourcing direct from Fluidra’s authorised parts network guarantees full traceability and compatibility.<\/p>\n
Replacement of the collector assembly requires draining and opening the filter tank, removing the existing sand bed, and extracting the old collector before fitting the new assembly. Given the size of the \u00d82350 filter and the volume of filter media involved, this work should be carried out by a qualified pool technician. Ensure all o-rings and seals are inspected and replaced as needed during installation to restore full pressure integrity.<\/p>","protected":false},"excerpt":{"rendered":"