This genuine Fluidra inlet and outlet connection kit provides the complete water inlet and outlet fittings for the AstralPool\/Fluidra Europe Filter with a \u00d82350 mm tank body. Designed for large-scale commercial pool filtration systems, it ensures a secure, leak-free hydraulic connection rated to a maximum working pressure of 2.5 kg\/cm\u00b2 (approx. 2.5 bar). It is the correct OEM replacement to restore full hydraulic performance when original fittings are worn, damaged, or being replaced during a filter overhaul.<\/p>\n
This kit is specifically engineered for the Fluidra Europe Filter \u00d82350 mm with a 1.2 m filter bed height and 2.5 kg\/cm\u00b2 pressure rating. The 200 mm connection diameter matches the original hydraulic ports on this large-format commercial fiberglass filter vessel. Always verify your filter model and connection diameter before ordering, as similar kits are available for other Europe Filter sizes and port diameters.<\/p>\n
Using an OEM Fluidra part guarantees that the inlet and outlet assemblies meet the original dimensional tolerances and pressure ratings of the filter vessel. Aftermarket substitutes may not seal correctly against the tank flange faces, risking leaks or premature failure under commercial operating pressures. Genuine Fluidra parts also ensure continued compliance with the filter’s rated working pressure specification.<\/p>\n
Installation should be carried out by a qualified pool technician. The filter must be fully depressurised and isolated from the circulation system before any work begins. Ensure all mating surfaces are clean and that any included gaskets or seals are correctly seated before tightening fittings to the manufacturer’s specified torque.<\/p>","protected":false},"excerpt":{"rendered":"