This is the genuine Fluidra replacement collector assembly for the Europe Filter \u00d82500 commercial sand filter, designed around a 160 mm centre riser pipe. The collector assembly sits at the base of the filter tank and comprises the central hub and slotted lateral arms that gather filtered water and direct it out of the tank, while ensuring thorough fluidisation of the sand bed during backwash cycles.<\/p>\n
During normal filtration, pool water passes down through the sand bed and is collected by the slotted lateral arms before being channelled through the central hub and out via the 160 mm riser pipe. During backwash, flow is reversed through the same assembly, lifting and agitating the sand to flush trapped debris \u2014 making the integrity of this collector critical to both filtration efficiency and effective cleaning.<\/p>\n
This collector assembly is engineered specifically for the Fluidra Europe Filter \u00d82500 with a 160 mm connection pipe, rated to 2.5 kg\/cm\u00b2 (2.5 bar). Always verify your filter’s tank diameter and pipe diameter before ordering, as Fluidra produces collector assemblies in multiple sizes (e.g. 125 mm, 140 mm, 200 mm) for different Europe Filter models \u2014 they are not interchangeable.<\/p>\n
As a large-volume commercial filter handling flow rates up to 172 m\u00b3\/hr, the Europe Filter \u00d82500 demands components built to exact tolerances. A genuine Fluidra collector assembly ensures correct lateral spacing, slot dimensions, and hub sealing to maintain rated filtration performance and system pressure integrity. Aftermarket substitutes risk sand bypass, poor backwash, or premature failure under commercial operating loads.<\/p>","protected":false},"excerpt":{"rendered":"