This is a genuine Fluidra spare part \u2014 the side thread fitting on the CellGuard electrolysis cell body used in the Elite Connect CellGuard pH 12 salt chlorinator system. It forms the threaded port on the cell housing into which the pH injector assembly is installed, ensuring a secure, leak-free connection between the cell and the pH dosing circuit.<\/p>\n
This side thread fitting is designed specifically for the Fluidra Elite Connect CellGuard pH 12 salt chlorinator (and related CellGuard pH models). It is an integral part of the CellGuard electrolysis cell, which connects to pool pipework via PVC glued joints in 50 mm or 63 mm diameter. Always verify your exact model and assembly diagram before ordering to ensure correct fitment.<\/p>\n
The CellGuard cell operates at up to 1 kg\/cm\u00b2 water pressure in pool circulation conditions. Using a genuine Fluidra thread fitting guarantees dimensional accuracy, chemical resistance to salt water, and a proper seal for the pH injector \u2014 all critical to maintaining the performance of the CellGuard’s patented self-cleaning technology and protecting the electrode’s rated service life of up to 18,000 hours.<\/p>\n
The pH injector is installed through this side thread port by placing the O-ring on the injector thread and screwing the injector finger-tight into the cell housing. No special tools are required for the thread connection itself, but full installation of the Elite Connect CellGuard system should be carried out by a qualified pool technician in accordance with the Fluidra installation manual.<\/p>","protected":false},"excerpt":{"rendered":"