This is the genuine Fluidra replacement power PCB assembly (electrolysis stage) for the Elite Connect CellGuard\u00ae pH 32 g\/h salt chlorinator. It is the dedicated power board responsible for converting and delivering the DC output current to the electrolysis cell, enabling the unit to produce up to 32 grams of chlorine per hour. Replacing a faulty power board restores full chlorination output without the need to replace the entire control unit.<\/p>\n
This power PCB assembly is designed exclusively for the Fluidra Elite Connect CellGuard\u00ae pH 32 g\/h salt chlorinator (AstralPool brand). The Elite Connect CellGuard\u00ae pH 32 operates at 230 Vac \/ 50\u201360 Hz with a 16 A DC output and uses a 4 AT (5\u00d720 mm) fuse. Always verify your unit’s model and production rating before ordering, as power boards differ between the 12, 24, 32, and 42 g\/h variants and are not interchangeable.<\/p>\n
The Elite Connect CellGuard\u00ae is a sophisticated pool management system with integrated Wi-Fi, Bluetooth, a 2.8″ TFT touchscreen, and support for S-Driver modules. The power PCB must meet precise electrical tolerances to safely drive the CellGuard\u00ae electrolysis cell \u2014 which is rated for up to 18,000 hours of electrode life under normal conditions. A genuine Fluidra part ensures correct voltage regulation, polarity control, and full compatibility with the unit’s onboard diagnostics and alarm systems.<\/p>\n
Replacement of the power PCB should be carried out by a qualified pool technician or licensed electrician. The board interfaces directly with mains voltage and the high-current DC cell output, so all electrical safety protocols must be followed. Disconnect power completely before opening the control unit enclosure, and ensure the replacement board is oriented and connected exactly as the original.<\/p>","protected":false},"excerpt":{"rendered":"