This is the genuine Fluidra low-pressure switch for the refrigerant circuit of Zodiac\/Fluidra pool heat pumps. Rated 0.5\u20132 bar and designed for direct solder\/braze installation into the refrigerant pipework, it monitors low-side refrigerant pressure and trips the heat pump’s safety circuit if pressure falls outside the safe operating range, preventing compressor damage.<\/p>\n
This pressure switch is a direct OEM replacement for a wide range of Fluidra Zodiac heat pumps, including the EdenPac 1\u20135, EdenPac 6\u20138, Z300, PM30, PowerFirst, PowerFirst Premium, PowerPac 1\u20133, PowerForce 25 & 35, Z400 iQ R32, and Z700 Duo. Always cross-reference your heat pump’s model number and exploded-parts diagram before ordering to confirm fitment.<\/p>\n
As a safety-critical component in the refrigerant circuit, using a genuine Fluidra part ensures the correct switching thresholds (0.5 bar cut-in \/ 2 bar cut-out) are maintained. An incorrect or substandard switch can allow the compressor to run in a low-refrigerant condition, leading to costly compressor failure or voiding your heat pump’s warranty.<\/p>\n
The solder-type fitting requires the refrigerant circuit to be recovered before removal of the old switch and brazing of the new one into the pipework. This work must be carried out by a qualified refrigeration engineer holding the appropriate F-Gas certification. Recharge and leak-testing of the refrigerant circuit is required after installation.<\/p>","protected":false},"excerpt":{"rendered":"