Profec 3-weg kogelkraan met L-doorlaat, PVC-U DN50, 63 mm, lijmverbinding, 10 bar
Verzending 1-3 weken
Gecertificeerd webwinkel
Eenvoudig retourneren binnen 14 dagen
Op zoek naar advies?
Profec 3-Way L-Bore PVC-U Ball Valve DN50 – 63 mm Glue Socket, 10 bar
This Profec three-way ball valve in PVC-U (unplasticised PVC) gives installers precise flow diversion or mixing control in a single compact body. The L-bore ball pattern connects one inlet to either of two outlets — ideal for bypassing, diverting to a second circuit, or directing pool water between a filter run and a backwash line. At DN50 (63 mm OD glue socket) and rated to 10 bar, the valve handles high-flow pool filtration, irrigation mains and industrial process water with ease.
The grey PVC-U body resists chlorine, fertiliser solutions and mild acids across the full 0 °C – 60 °C service range without corrosion. PTFE seats combined with EPDM seals provide a bubble-tight shut-off and long service life in both wet and dry conditions. The bright-red lever provides an unambiguous visual indication of ball position, allowing quick confirmation of flow path from a distance. Union-style end connections on all three ports mean the valve can be removed from the line without cutting pipe, simplifying seasonal maintenance.
Technische gegevens
- Nominale diameter: DN50
- Socket OD (ØDi-1 / ØDi-2): 63 mm
- Overall body length (Lb): 230 mm
- Face-to-face (inline ports): 128 mm
- Branch port centre height (Ct-1): 100 mm
- Ball bore diameter (ØDf): 50 mm
- Handle span (R): 128 mm
- Body height incl. lever: approx. 230 mm
- Branch offset dimension: 100 mm
- End-to-branch centre: 50 mm
- Connection type: Glue socket (solvent-cement, plain spigot EN 1452)
- Patroon van de kogelboring: L-boring (zijaansluiting / omleider)
- Body material: PVC-U (grey, RAL 7011)
- Materiaal van de bal: PVC-U
- Seat / seal material: PTFE seats, EPDM O-rings
- Handgreep: Hendel, rood PVC
- Werkdruk: 10 bar
- Temperatuurbereik: 0 °C – 60 °C
- Port configuration: 3-way, one inline pair + one branch port at 90°
Compatibiliteit
The 63 mm plain glue sockets accept standard EN 1452 / ISO 4422 PVC-U pipe with a 63 mm outside diameter, as used in DN50 pool pipework, irrigation mains and industrial chemical lines. The valve is compatible with chlorinated pool water, standard fertiliser irrigation solutions and cold potable water within the stated pressure and temperature limits. It is not rated for hot water above 60 °C, compressed air or solvents. Verify chemical compatibility before use with aggressive media.
Bijkomende informatie
| Merk: | Profec |
|---|---|
| Type klep: | 3-way ball valve |
| Bore pattern: | L-bore (diverter / side connection) |
| Nominale diameter: | DN50 |
| Socket outside diameter: | 63 mm |
| Diameter van de kogellageropening (ØDf): | 50 mm |
| Totale lengte (Lb): | 230 mm |
| Inline face-to-face: | 128 mm |
| Branch port centre height (Ct-1): | 100 mm |
| End to branch centre: | 50 mm |
| Spaanwijdte (R): | 128 mm |
| Verbindingstype: | Glue socket (solvent-cement, EN 1452) |
| Materiaal van de behuizing: | PVC-U |
| Materiaal van de bal: | PVC-U |
| Materiaal van de zitting: | PTFE |
| Materiaal van de afdichting: | EPDM |
| Materiaal van het handvat: | PVC |
| Kleur van het handvat: | Rood |
| Carrosseriekleur: | Grijs |
| Werkdruk: | 10 bar |
| Temperatuurbereik: | 0 °C – 60 °C |
| Number of ports: | 3 |
| Standaard: | EN 1452 / ISO 4422 |
In detail
- Full DN50 (50 mm) bore delivers minimal pressure drop in high-flow pool and irrigation circuits
- Union-style end connections on all three ports allow tool-free removal without cutting pipe
- L-bore pattern enables true diversion between two circuits with a single 90° lever movement
- PTFE seats and EPDM seals provide long-term bubble-tight performance in chlorinated water
- PVC-U construction is fully corrosion-proof and compatible with most pool and irrigation chemicals
- Glue-socket connection requires solvent-cement bonding — joint must cure fully before pressurising
- L-bore does not allow simultaneous flow to both outlet ports (T-bore required for mixing/combining duty)
- Maximum 60 °C service temperature excludes use in hot-water or steam applications
