Maytronics Dolphin M400 IoT 180W Wi-Fi power supply unit V10 - 99956083-ASV10

Maytronics Dolphin M400 IoT 180W Wi-Fi power supply unit V10

This is the genuine Maytronics 180W Wi-Fi power supply unit (V10) for the Dolphin M400 IoT and a wide range of compatible Dolphin robotic pool cleaners. It converts mains AC power to the low-voltage DC required by the robot’s drive and filtration motors, while providing full cloud-connected control via the MyDolphin Plus app on iOS and Android. As the electronic brain of the system, a faulty or ageing power supply should always be replaced with an OEM unit to protect the robot’s motors and onboard electronics.

Function and connectivity

The unit delivers a regulated DC output of under 30 V at 180 W to drive the robot reliably throughout every cleaning cycle. Built-in Wi-Fi (2.4 GHz) and Bluetooth allow the power supply to connect to your home network and the Maytronics cloud, giving you remote start, stop and scheduling from anywhere via smartphone. A single ON/OFF button starts the cleaner instantly, while colour-coded LED indicators show connection status at a glance: blue flashing when awaiting Bluetooth pairing, blue steady when connected via Bluetooth, green flashing when connecting to Wi-Fi, and green steady when fully cloud-connected.

Compatible Dolphin models

This V10 unit is the correct replacement for the Dolphin M400 IoT EU and is also compatible with a broad range of other Wi-Fi-enabled Dolphin robots, including the Dolphin Sigma, M500, M600, M700, Nautilus CC Supreme, Active 60, Active X4, Active X5, Active X6, Active X7, Active Ultimate, Comfort Active, Deluxe Active, Explorer E70, Maximus X70, Maximus X90, Zenit 20, Zenit 30, Zenit 60, Zenit 70, KAPTUR 400, KAPTUR 500, DIVER PRO 400, DIVER PRO 500, Evolution 50, Evolution 60, EX60, F60, SF60, Swell MX, Blue Maxi 65, TopStar gold, TopStar platin, SOPRA PERFECT, SOPRA PREMIUM and others. Always verify the part number printed on the base of your existing power supply before ordering.

Symptoms that indicate replacement is needed

Replace this power supply if the robot fails to power on at all, cuts out mid-cycle, loses Wi-Fi or Bluetooth connectivity permanently, displays a solid red LED fault indicator, or shows erratic cycling behaviour that persists after a cable check. A failed unit can also cause apparent motor problems — confirm the power supply is not the fault before replacing any drive components.

Why genuine Maytronics matters

Aftermarket power supplies frequently deliver unregulated or incorrect voltages that accelerate wear on the robot’s brushless drive motors and control board. The genuine Maytronics V10 unit is built to the exact electrical tolerances of the Dolphin platform, carries thermal protection against overload, and is the only replacement that preserves the full manufacturer warranty on your robot.