Maytronics Dolphin Ex 10 grote wielkap wit S1 - M96100011

Maytronics Dolphin Ex 10 large wheel cover white S1

This is the genuine Maytronics large wheel cover in white for the S1 chassis, designed to encase and protect the outer face of the drive wheel assembly on the Dolphin Ex 10 robotic pool cleaner. It clips securely over the wheel hub, retaining the wheel disk in place while shielding the internal bearing and axle from pool water, debris and UV exposure. Replacing a cracked, broken or missing cover restores both the structural integrity of the wheel assembly and the clean factory appearance of the robot.

Functie en rol in het aandrijfsysteem

The large wheel cover acts as the outermost protective shell on each drive wheel. It locks the wheel disk onto the axle stub, prevents lateral play in the wheel and keeps grit and hair from reaching the hub cavity. Without an intact cover the wheel disk can shift or detach entirely, causing the robot to veer, lose traction or stop climbing pool walls altogether.

Compatibele Dolphin-modellen

This part is confirmed for the Dolphin Ex 10 (S1 platform). The same large white wheel cover is also used across the closely related S1-chassis models including the Dolphin E10, Dolphin Echo, Dolphin T15, Dolphin Proteus DX3, and equivalent Prowler/Warrior SL variants sold under the Maytronics umbrella. Always verify your robot’s chassis generation before ordering.

Symptomen die erop wijzen dat vervanging nodig is

Replace this cover if you notice the outer face of a drive wheel is cracked, chipped or missing its protective cap; if the wheel disk wobbles or detaches during a cleaning cycle; or if the robot tracks unevenly and inspection reveals a loose or absent wheel cover rather than a worn drive track. A broken cover can also allow debris to jam the wheel hub, accelerating wear on the axle and wheel disk.

Waarom originele Maytronics-onderdelen belangrijk zijn

Genuine Maytronics parts are manufactured to the exact tolerances of the original robot and are guaranteed to fit without modification. Aftermarket covers are frequently moulded from inferior plastics that crack prematurely under UV and chlorinated-water exposure, or that fit loosely and allow the wheel disk to unseat. Using an authentic part maintains your robot’s warranty coverage and ensures the wheel assembly performs as Maytronics designed it.