Hayward - Free Chlorine Control Kit
Verzending 1-2 weken
Gecertificeerd webwinkel
Eenvoudig retourneren binnen 14 dagen
Op zoek naar advies?
Hayward Free Chlorine Control Kit
Referentie: 12474
Free Chlorine Control Kit
The Free Chlorine Control Kit enables continuous measurement and automated control of free chlorine levels in pool water, expressed in ppm (mg/l). Unlike redox sensors — which measure the overall oxidation potential — an amperometric free chlorine sensor measures the actual free chlorine concentration directly, providing more accurate and reliable readings for automated dosing systems.
Maintaining free chlorine within the recommended range (typically 0.5–1.5 ppm for salt-chlorinated pools) is essential for effective disinfection while avoiding irritation and excessive chemical consumption.
Wat zit er bij inbegrepen?
- Amperometric free chlorine sensor
- Flow cell housing for inline installation
- Connection cable for Hayward controller
- Calibration solutions and accessories
- Full installation and calibration instructions
Installatie en onderhoud
Install the flow cell in the return line where water flow is consistent. Calibrate the sensor using the supplied calibration solution after installation and repeat every 4–8 weeks. The sensor membrane and electrolyte require periodic replacement — typically every 6–12 months.
- Referentie: 12474
- Compatible with Hayward NG automated dosing controllers
- Target range: 0.5–1.5 ppm free chlorine
Bijkomende informatie
| Referentie: | 12474 |
|---|---|
| Merk: | Hayward |
In detail
- Enables precise monitoring of free chlorine or redox levels
- Designed for integration with Hayward automated dosing systems
- Complete kit with sensors, fittings and connection cables
- Suitable for continuous immersion in pool water
- Improves water quality consistency and reduces chemical waste
- Requires periodic recalibration with reference solutions
