Fluidra - Diffuser Assembly Ø225 mm for Europe Filter Ø2500 (1.0 m Bed)

Fluidra – Diffuser Assembly Ø225 mm for Europe Filter Ø2500 (1.0 m Bed)

This is the genuine Fluidra replacement diffuser assembly designed for the Europe Filter Ø2500–225 mm sand filter with a 1.0 m sand bed and a maximum working pressure of 2.5 kg/cm². The diffuser sits at the top of the filter vessel and evenly distributes incoming water across the full surface of the filter media, ensuring efficient, uniform filtration throughout the entire sand bed.

Compatibiliteit

This diffuser assembly is a direct OEM replacement for the Fluidra Europe Filter Ø2500 mm with a 225 mm diffuser diameter and a 1.0 m deep sand bed, rated at 2.5 kg/cm² working pressure. It is intended for large-volume commercial or public swimming pool installations. Always confirm your filter’s tank diameter, sand bed depth, and diffuser diameter against your original documentation before ordering — this assembly is not interchangeable with Europe Filter variants of different tank diameters or bed depths.

Waarom authenticiteit belangrijk is

As a genuine Fluidra OEM spare, this diffuser assembly is manufactured to the exact tolerances required by the Europe Filter housing, guaranteeing a precise fit and reliable hydraulic performance. Aftermarket alternatives may not match the diffuser’s tube diameter, arm configuration, or material specification, risking channelling in the sand bed, premature wear, or sand breakthrough into the pool. Fitting a genuine part also keeps any remaining manufacturer warranty intact.

Installatie

Before fitting, isolate the pump and depressurise the filter system completely. Remove the filter lid, carefully extract the old diffuser assembly, and inspect the housing for wear or debris. Lower the new diffuser assembly into position, ensuring all arms are correctly seated and the central tube is fully engaged. Replace the filter lid, re-pressurise the system, and check for leaks before returning the filter to service. Due to the size and complexity of this filter, installation by a qualified pool technician is strongly recommended.