Blue Lagoon - Timer UV-C 4ALL Replacement Housing 40/75/130W - H170054

Blue Lagoon – Timer UV-C 4ALL Replacement Housing 40/75/130W

This is the genuine replacement reactor housing for the Blue Lagoon Timer UV-C 4ALL series, compatible with all three power variants: 40 W, 75 W, and 130 W (amalgam). It is the structural core of the UV-C unit — the sealed body through which pool water flows and is exposed to UV-C radiation — and is designed to be replaced when the original housing shows signs of wear, damage, or corrosion.

Compatibiliteit

This housing fits the Blue Lagoon Timer UV-C 4ALL 40 W (BH01402), 75 W (BH01752), and 130 W Amalgam (BH01132) units. It is not interchangeable with other Blue Lagoon UV-C series such as the Inox or Tech ranges. Always verify your unit’s model number before ordering. Note that the earth connection and electrical/display assembly are not supplied with the replacement housing and must be carefully transferred from the old unit.

Waarom authenticiteit belangrijk is

The 4ALL housing is manufactured from highly corrosion-resistant DUPLEX stainless steel, making it equally at home in chlorinated and salt-water (electrolysis) pool installations. A genuine Blue Lagoon housing ensures dimensional accuracy for a watertight seal with the quartz sleeve, end caps, and 3-way connection fittings — preventing leaks and maintaining full UV-C disinfection performance. Aftermarket alternatives may compromise the sealed integrity of the reactor chamber.

Installatie

Replacing the housing requires disconnecting the earth lead and unscrewing the electrical unit with display and the lamp holder from the old body before fitting them to the new one. The UV-C lamp and quartz sleeve should be handled with care during the transfer. It is recommended that installation is carried out by a qualified pool technician. The unit must always be installed after the pump and filter, and never downstream of a pH controller or salt electrolysis system.