Fluidra - Diffuser Screw Set for Sand Filter Ø900 mm / 30,000 l/h

Fluidra – Diffuser Screw Set for Sand Filter Ø900 mm / 30,000 l/h

This is the genuine Fluidra replacement screw hardware set designed to secure the diffuser assembly inside the Ø900 mm sand filter rated at 30,000 l/h with a 2½” valve-free connection. The diffuser plays a critical role in distributing incoming water evenly across the filter bed, and properly fastened screws are essential to keep it firmly and correctly positioned during operation.

Compatibility

This screw set is specifically listed as a spare part for the Fluidra sand filter range with a 900 mm tank diameter, a flow rate of 30,000 l/h, and a 2½” valve-free (sin válvula) configuration. Always cross-reference your filter’s model number and the exploded-view diagram in your owner’s manual before ordering to confirm fitment.

Why Genuine Matters

Using genuine Fluidra hardware ensures the correct thread type, dimensions, and material grade for your filter’s diffuser. Non-OEM fasteners risk incorrect fit, corrosion, or loosening under pressure, which can disrupt water distribution, reduce filtration efficiency, and void any remaining warranty on your filter unit.

Installation

Replacement is straightforward for competent pool technicians: drain and open the filter tank, remove the old or damaged screws securing the diffuser plate, and fit the new set to the manufacturer’s specified torque. Ensure all screws are fully seated and uniform before closing the tank and returning the filter to service.