Fluidra - Manifold Arm Assembly for Europe Filter Ø1050–1200 mm, 1½"

Fluidra – Manifold Arm Assembly for Europe Filter Ø1050–1200 mm, 1½”

This is a genuine Fluidra replacement manifold arm assembly designed for the Europe Filter commercial sand filters in Ø1050 mm and Ø1200 mm tank sizes, with a 1½” connection. The manifold arm assembly sits at the base of the filter tank, collecting filtered water from the sand bed and channelling it evenly to the return outlet while preventing sand or media from passing through to the pool.

Compatibility

This assembly is a direct OEM spare part for the Fluidra Europe Filter range — specifically the Ø1050 mm and Ø1200 mm models with a 1½” outlet and a maximum working pressure of 2.5 kg/cm² (2.5 bar). Always verify your filter’s tank diameter, outlet size, and pressure rating before ordering to ensure a correct match.

Why genuine matters

Genuine Fluidra manifold arms are precision-engineered to match the exact internal geometry of the Europe Filter tank, ensuring a leak-free seat and correct lateral spacing across the sand bed. Using a non-genuine part risks uneven filtration, sand bypass, or premature component failure — particularly in high-flow commercial installations where hydraulic loads are significant.

Installation

The manifold arm assembly replaces the entire collector arm unit at the bottom of the filter vessel. Installation requires draining the filter, removing the sand media, and fitting the new assembly before recharging with filter sand. Due to the scale of commercial Europe Filter units, professional installation by a qualified pool technician is strongly recommended.