Fluidra - Manifold Arm Assembly 1" for Europe Filter Ø1800 mm

Fluidra – Manifold Arm Assembly 1″ for Europe Filter Ø1800 mm

This is a genuine Fluidra manifold arm assembly with 1″ connections, designed as a direct replacement spare for the Fluidra Europe Filter Ø1800 mm commercial sand filter. The manifold arm sits inside the filter tank and forms part of the internal distribution system, evenly distributing water across the filter bed during filtration and collecting filtered water for return to the pool.

Compatibility

This assembly is specifically matched to the Fluidra Europe Filter Ø1800 mm with 125 mm connection and 1.0 m filter bed depth, rated at 2.5 kg/cm². Always verify your filter’s model code and connection size before ordering, as manifold arm dimensions vary between Europe Filter tank diameters.

Why Genuine Matters

A worn or damaged manifold arm can allow unfiltered water to bypass the sand bed, compromising water quality across the entire pool system. Using a genuine Fluidra part ensures correct fit, pressure rating up to 2.5 kg/cm², and long-term reliability in commercial filtration applications where flow rates can reach 63–89 m³/h.

Installation

Replacement of the manifold arm requires draining and opening the filter tank. The part should be fitted by a qualified pool technician to ensure correct sealing and re-assembly of all internal filter components. Always inspect surrounding seals and laterals for wear at the same time to avoid repeat call-outs.