Fluidra - Inlet/Outlet Connection Kit Ø90 mm for PTK 1200 Sand Filter (Ø1050–Ø1400)

Fluidra – Inlet/Outlet Connection Kit Ø90 mm for PTK 1200 Sand Filter (Ø1050–Ø1400)

This genuine Fluidra inlet/outlet kit provides the complete set of hydraulic connection fittings for the water inlet and outlet ports on the ARM Filters PTK 1200 M/M commercial sand filter range. Designed for tank diameters of Ø1050, Ø1200, and Ø1400 mm, it ensures a correctly sealed, full-bore Ø90 mm connection between the filter vessel and the pool pipework.

Compatibility

This kit is engineered specifically for the Fluidra ARM Filters PTK 1200 M/M series in tank diameters Ø1050, Ø1200, and Ø1400 mm. It is not interchangeable with the smaller PTK 1000 M/M series or with non-PTK filter ranges. Always verify your filter’s tank diameter and connection size before ordering.

Why Genuine Matters

The PTK 1200 filter operates under significant hydraulic pressure in commercial and public pool environments. Genuine Fluidra parts are manufactured to exact tolerances, with fittings in PVC, PP, or ABS and EPDM-grade sealing elements, ensuring a leak-free joint that meets the performance demands of the original installation. Third-party substitutes may not match the port geometry or pressure rating of the OEM assembly.

Installation

The kit replaces worn, cracked, or leaking inlet and outlet connection assemblies on the filter tank shell. Installation involves draining and isolating the filter, removing the existing fittings, and fitting the new assembly with appropriate thread sealant or gaskets as supplied. Due to the commercial scale of PTK 1200 filters, installation by a qualified pool technician is strongly recommended.