Fluidra - Collector Diffuser Support Bracket Ø1050 mm

Fluidra – Collector Diffuser Support Bracket Ø1050 mm

This is the genuine Fluidra collector diffuser support bracket, designed for large-diameter commercial and public pool sand filters with a tank diameter of 1050 mm. It holds the central diffuser and collector manifold securely in position inside the filter vessel, ensuring correct water distribution through the filter bed for effective filtration. It is an essential structural component that keeps the internal assembly aligned during both filtration and backwash cycles.

Compatibility

This support bracket is compatible with Fluidra sand filters in the Ø1050 mm tank size range, including models from the Artic and Praga filter families. Always verify your filter’s model number and tank diameter before ordering to ensure a correct fit. If in doubt, cross-reference with your filter’s exploded parts diagram or contact your Fluidra supplier.

Why Genuine Matters

As a genuine Fluidra OEM spare part, this bracket is manufactured to the exact tolerances of the original, ensuring a secure, rattle-free fit with the collector arms and diffuser assembly. Non-genuine alternatives risk poor alignment, which can cause channelling through the filter media, reduced water quality, and premature wear on surrounding components.

Installation

Fitting this part requires access to the interior of the filter tank, which typically means opening the filter head or top cover. The diffuser and collector assembly must be fully removed and refitted correctly, with all collector arms checked for position before resealing the filter. Professional installation by a qualified pool technician is strongly recommended for filters of this size.