Fluidra - Sand Filter Manifold Assembly Ø600 mm

Fluidra – Sand Filter Manifold Assembly Ø600 mm

This is the genuine Fluidra replacement manifold assembly designed for the BWS2 sand filter with a 600 mm tank diameter. The manifold is the internal pipe-and-lateral system that distributes incoming pool water evenly across the sand bed during filtration and collects clean, filtered water for return to the pool. Replacing a cracked or damaged manifold restores full filtration efficiency and prevents unfiltered water from bypassing the sand media.

Compatibility

This manifold assembly is a factory spare part for the Fluidra BWS2 series sand filters in the 400–500–600–660 mm diameter range, specifically sized for the Ø600 mm tank variant. Always cross-reference your filter’s model number and tank diameter before ordering to ensure a correct fit — manifold dimensions are tank-specific and are not interchangeable between different diameter models.

Why Genuine Matters

As an OEM Fluidra component, this assembly is manufactured to the exact tolerances of the original part, ensuring a secure fit within the filter tank and proper water distribution across the entire sand bed. Aftermarket laterals and manifolds often differ in arm length or hub diameter, leading to channelling, short-circuiting of flow, or premature failure. Choosing genuine Fluidra protects your filter’s performance warranty and gives long-term reliability.

Installation

Installation requires draining and opening the filter tank, removing the existing manifold, and fitting the new assembly before re-filling with filter sand. It is recommended that a qualified pool technician carries out this work, as incorrect re-assembly or improper sand levels can compromise filtration performance and pressure ratings. Always re-check all seals and connections before returning the filter to service.