Fluidra - Manifold Assembly for Prana Screw-Top Sand Filter Ø950 mm

Fluidra – Manifold Assembly for Prana Screw-Top Sand Filter Ø950 mm

This is the genuine Fluidra manifold assembly designed for the Prana screw-top sand filter with a 950 mm tank diameter. Sitting at the base of the filter’s sand bed, the manifold collects filtered water through its lateral arms and channels it out of the tank — making it a critical component for correct filtration and backwash performance. Replacing a cracked or damaged manifold restores proper flow distribution and prevents unfiltered water or sand from bypassing the filter media.

Compatibility

This manifold assembly is specifically matched to the Fluidra Prana screw-top sand filter range in the Ø950 mm tank size. Always verify your filter model and tank diameter before ordering, as manifold assemblies are size-specific and are not interchangeable between different tank diameters within the Prana range.

Why Genuine Matters

As an OEM Fluidra spare part, this manifold is manufactured to the exact tolerances of the original, ensuring a precise fit and reliable long-term performance. Aftermarket alternatives may not match the lateral arm geometry or hub dimensions, risking poor flow distribution, sand bypass, or early failure. Choosing genuine Fluidra protects the efficiency of your filtration system and your warranty.

Installation

The manifold assembly is accessed by removing the screw-top lid of the Prana filter and emptying the sand media. The assembly slots into the base hub of the filter tank and the lateral arms spread radially across the tank floor. It is advisable to have a pool technician carry out this replacement to ensure the sand bed is correctly re-graded and the manifold is properly seated before the filter is returned to service.