This genuine Fluidra threaded lid collar is the locking ring that secures the pre-filter basket lid to the pump body on the Baracuda AquantisMax 200M pool pump. It creates a reliable, watertight connection between the lid and the pump housing, ensuring the pre-filter chamber stays safely sealed during operation. Without an intact collar, the pump cannot maintain prime or operating pressure.<\/p>\n
This collar is a dedicated spare part for the Baracuda AquantisMax 200M self-priming pool pump from Fluidra. It is not a universal fitting \u2014 always confirm your pump model before ordering to ensure a correct fit. Refer to your pump’s exploded-view parts diagram or the Fluidra spare parts catalogue if you are unsure.<\/p>\n
As an original Fluidra component, this collar is manufactured to the exact thread pitch, diameter, and material specification of the factory part. Aftermarket alternatives can differ in thread geometry or material strength, risking leaks or lid seizure over time. Using a genuine replacement protects the integrity of the pump and preserves any remaining warranty.<\/p>\n
Replacement is a straightforward hand-tightening task: remove the old collar, clean the mating threads on the pump body, and thread the new collar on by hand until firmly seated. Do not use tools to over-tighten, as this can stress the plastic threads. It is good practice to inspect the lid O-ring at the same time and replace it if worn.<\/p>","protected":false},"excerpt":{"rendered":"