Valvola a sfera VDL in PVC-U da 16 mm con raccordo a incollaggio, 16 bar, DN10, grigia, tipo EIL
Spedizione 1-3 settimane
Certificato negozio online
Resi facili entro 14 giorni
Cercando consigli?
VDL PVC-U Ball Valve DN10 – 16 mm Glue Socket, 16 bar, Type EIL
This VDL type EIL ball valve is machined from grey PVC-U (unplasticised polyvinyl chloride) and designed for full-bore shutoff in potable water, pool circulation, irrigation, and light chemical-handling systems. The 16 mm solvent-cement glue socket ends bond directly to standard PVC-U pipe, creating a leakproof, corrosion-free joint that outlasts metal alternatives in humid or chlorinated environments. An EPDM seat and seals ensure reliable shutoff across the full 0 °C to 60 °C service range.
The single-union body design — clearly visible in the technical cross-section — allows the downstream half to be removed for inline servicing or replacement without cutting the pipeline. The oversized orange PVC-U lever provides a positive 90° open/close indication and is easy to operate even with wet or gloved hands. At a rated working pressure of 16 bar, this valve comfortably handles high-head pool pump circuits and pressurised irrigation mains where DN10 pipework is specified.
Specifiche tecniche
- Nominal diameter: DN10
- Tipo di collegamento: raccordo a incollaggio (colla a solvente), su entrambe le estremità
- Socket inside diameter (ØDi-1 / ØDi-2): 16 mm
- Ball bore diameter (ØDf): 10 mm
- Overall body length (Lb): 77 mm
- Face-to-face length: 50 mm
- Handle rotation radius (R): 82 mm
- Total height incl. handle (Ct-1): 15 mm above centreline
- Pressione di esercizio: 16 bar
- Intervallo di temperatura: da 0 °C a 60 °C
- Materiale del corpo: PVC-U, grigio (RAL 7011)
- Materiale della maniglia: PVC-U, rosso/arancione
- Materiale della guarnizione / della sede: EPDM
- Type: EIL (single-union, true-union style)
- Operation: Manual lever, 90° quarter-turn
Compatibilità
Suitable for solvent-cement jointing to 16 mm outside-diameter PVC-U pressure pipe conforming to EN ISO 1452 / DIN 8061-8062. Compatible with standard PVC solvent cement and primer. Intended for cold and warm water systems up to 60 °C, pool and spa pipework, drip and spray irrigation headers, and greenhouse nutrient-dosing circuits where DN10 (16 mm) PVC-U pipe is used. Not suitable for hot water above 60 °C, steam, or concentrated aromatic solvents.
Informazioni aggiuntive
| Marchio: | VDL |
|---|---|
| Type / model: | EIL |
| Diametro nominale: | DN10 |
| Tipo di connessione: | Incollaggio del manicotto (colla a solvente), su entrambe le estremità |
| Socket inside diameter: | 16 mm |
| Diametro del foro della sfera (ØDf): | 10 mm |
| Lunghezza totale del corpo (Lb): | 77 mm |
| Profondità di inserimento del manicotto: | 16 mm |
| Lunghezza della superficie di contatto: | 50 mm |
| Raggio di rotazione della maniglia (R): | 82 mm |
| Height above centreline incl. handle (Ct-1): | 15 mm |
| Pressione di esercizio: | 16 bar |
| Intervallo di temperatura: | 0 °C – 60 °C |
| Materiale della carrozzeria: | PVC-U |
| Colore della carrozzeria: | Grigio |
| Materiale del manico: | PVC-U |
| Colore della maniglia: | Red / orange |
| Seal and seat material: | EPDM |
| Funzionamento: | Manual lever, 90° quarter-turn |
| Body design: | Single-union (true-union side) |
In dettaglio
- Full 16 bar pressure rating handles high-head pool pump circuits without derating
- Single-union body allows downstream removal and inline servicing without cutting the pipe
- Solvent-cement glue socket joints are permanently leak-free and require no threading tools
- EPDM seals are compatible with chlorinated pool water and common fertiliser solutions
- Compact 77 mm body length fits tight plant rooms and manifold assemblies
- Glue socket connection is permanent — pipe must be cut to remove the valve unless the union end is used
- La temperatura massima di esercizio di 60 °C non include le applicazioni con acqua calda o vapore
- DN10 / 16 mm bore limits flow capacity; not suitable where larger pipe diameters are required
