Cavo di alimentazione Maytronics Dolphin C6, 230 V, spina UE - 58984401LF

Maytronics Dolphin C6 power supply mains cable 230V EU plug

This is the genuine Maytronics replacement mains cable that connects the Dolphin power supply unit to the 230V AC wall socket. It carries a two-pin EU (Schuko-compatible) plug on one end and an IEC C6 coupler on the other, mating directly with the C5 inlet on the Dolphin power supply unit. The Dolphin Supreme M5 ships with this cable as standard, and it is the correct OEM item to order when the original is damaged or missing.

What this mains cable does in the Dolphin

The cable delivers 230V AC from the mains socket to the power supply unit, which then steps the voltage down to low-voltage DC for the robot’s drive and pump motors. Without a sound mains cable, the power supply unit cannot function regardless of its own condition. The IEC C6 coupler locks positively into the power supply inlet, preventing accidental disconnection during a cleaning cycle.

A quali modelli Dolphin è compatibile

Maytronics lists a wide range of EU-market Dolphin robots compatible with part 58984401LF, including the C6, C6 Plus, Supreme M5, M400, Evolution 40/50/60, EX45, EX60, SF40/50/60, PS40/50/60, F40/50/60, KAPTUR 150/400, DIVER PRO 150/400/500, Zenit 15/20, Active X4, Wave 80/100, Maximus X70/X90, and several others sold across Europe. Always cross-reference the part number printed on your existing cable or power supply inlet before ordering.

Segnali che indicano la necessità di sostituirlo

Visible cracking, fraying, or stiffening of the cable jacket is the clearest indicator. Intermittent power cuts during a cleaning cycle — where the robot stops and restarts without any fault on the power supply display — often point to a compromised mains cable rather than a unit fault. A burnt smell or discolouration near either connector end means the cable must be replaced immediately before the next use.

Come installarlo

Unplug the existing cable from the wall socket first, then pull the IEC C6 coupler straight out of the power supply inlet — no tools required. Push the new coupler firmly into the inlet until it seats fully, then plug the EU end into the mains socket. The entire swap takes under a minute and requires no disassembly of the robot or the power supply unit.

Perché è importante scegliere prodotti Maytronics originali

Mains cables are a commonly replicated component; aftermarket versions frequently use underrated conductors or non-compliant insulation that can fail under poolside UV exposure and repeated coiling. The genuine Maytronics 58984401LF is manufactured to the voltage and current rating of the Dolphin power supply unit’s inlet, ensuring the IEC C6 coupler seats correctly and maintains a stable connection throughout each cleaning cycle.