Girante Maytronics Dolphin C6 con vite DC - gialla - 9995269
Maytronics Dolphin C6 impeller with screw DC – yellow
This is the genuine Maytronics yellow DC motor impeller with retaining screw for the Dolphin C6 robotic pool cleaner. The three-bladed plastic impeller sits on the DC drive motor shaft and generates the water flow that draws debris through the robot’s filtration system. Without a serviceable impeller, suction collapses and cleaning performance degrades rapidly.
Funzionalità e design
The impeller converts motor rotation into directed water flow, pulling pool water — along with leaves, fine dirt and algae — up through the robot’s intake and into the filter cartridge. The three-blade yellow PVC rotor is secured to the motor shaft by a single central stainless steel screw supplied in the kit, ensuring a vibration-free, leak-free fit against the motor housing.
Modelli Dolphin compatibili
This impeller is specified for the Dolphin C6 and is also confirmed to fit a broad range of Maytronics Dolphin robots sharing the same DC motor architecture, including the Dolphin 2×2, C5, PROX2, DX3, DX3s, DX4, DX4s, DX5, DX5 Plus, Deluxe 3, Deluxe CL1, Neptune, Neptune Plus, Wave 50, Wave 100, 3001 and 2002. Always verify your robot’s motor type before ordering.
Sintomi che indicano la necessità di una sostituzione
A worn or cracked impeller typically presents as noticeably reduced suction at the inlet, poor debris pickup despite a clean filter, unusual motor noise or vibration, and in advanced cases the motor running hot or stalling under load. Regular inspection of the impeller — at least every one to two weeks during heavy use — is recommended to prevent secondary motor damage.
Perché è importante utilizzare ricambi originali Maytronics
Genuine Maytronics replacement parts are manufactured to the exact tolerances of the original DC motor assembly. Counterfeit or generic impellers frequently fail to balance correctly on the motor shaft, accelerating bearing wear and voiding the robot’s warranty. Sourcing this part through an authorised Maytronics retailer guarantees factory quality and full compatibility with your Dolphin C6.
Informazioni aggiuntive
| Marchio: | Maytronics |
|---|---|
| Tipo: | DC motor impeller with retaining screw |
| Colore: | Giallo |
| Compatibile con: | Dolphin C6, C5, 2×2, PROX2, DX3, DX3s, DX4, DX4s, DX5, DX5 Plus, Deluxe 3, Deluxe CL1, Neptune, Neptune Plus, Wave 50, Wave 100, 3001, 2002 |
| Codice articolo Maytronics: | 9995269 |
| Materiale: | PVC plastic impeller body; stainless steel screw |
| Inclusi: | 1 × impeller, 1 × retaining screw |
| Blades: | 3-blade rotor |
| Approximate dimensions: | 2-5/16 in. diameter × 11/16 in. thickness (approx. 59 mm × 18 mm) |