Maytronics Dolphin 4 IoT, pannello laterale destro, grigio, 6C, 2010 - M96330184

Maytronics Dolphin 4 IoT right side panel grey 6C 2010

This is the genuine Maytronics replacement right-hand side panel for the Dolphin 4 IoT CB QP NC robotic pool cleaner, finished in grey and manufactured to the 6C 2010 body-platform specification. The side panel forms the outer structural skin on the right flank of the robot, protecting internal drive and motor components from pool water, debris and mechanical impact while maintaining the unit’s hydrodynamic profile during operation.

Funzione e ruolo nel robot

Side panels on Dolphin robotic cleaners do far more than provide cosmetic bodywork. The right-hand panel interlocks with the chassis frame, the track assembly and the filter-access lid to maintain structural rigidity throughout the cleaning cycle. Any distortion or breakage in this panel can compromise track alignment, cause water ingress around internal housings and reduce the robot’s ability to climb pool walls effectively.

Modelli compatibili

This panel is designed and manufactured specifically for the Maytronics Dolphin 4 IoT CB QP NC, a corded, IoT-enabled robotic pool cleaner built on the 6C 2010 platform. Always verify your robot’s model designation and chassis generation before ordering to ensure a precise fit; side panels are platform-specific and are not interchangeable across different body generations.

Sintomi che indicano la necessità di una sostituzione

Replace this panel if you observe visible cracking, warping or impact fractures on the right flank of the robot body, if the track or wheel assembly has become loose due to a damaged mounting point on the panel, or if the filter compartment no longer seals properly because the side panel interlock is broken. Operating the robot with a damaged side panel risks further ingress of debris into the drive train.

Perché è importante utilizzare ricambi originali Maytronics

Genuine Maytronics parts are dimensionally identical to the components installed at the factory, ensuring correct snap-fit assembly and no stress on adjacent fixings. Aftermarket panels frequently deviate in wall thickness and clip geometry, leading to premature failure or voiding of any remaining warranty. This part is supplied directly from Maytronics and is covered by the manufacturer’s standard spare-parts guarantee.