Hydro-Pro - Pressostato di alta pressione 3,2 MPa / 4,4 MPa (verde) per pompa di calore tipo P - 7011008

Hydro-Pro – High Pressure Switch 3.2 MPa / 4.4 MPa (Green) for Type P Heat Pump

This is the genuine Hydro-Pro replacement high pressure switch (green) for the Hydro-Pro Type P On/Off pool heat pump series, including the P6/32. It monitors refrigerant circuit pressure and cuts out the compressor if pressure exceeds safe limits, protecting the heat pump from damage caused by over-pressure conditions. The green colour coding makes it easy to identify the correct part during servicing.

Come Funziona

The high pressure switch is a critical safety component in the refrigerant circuit of your pool heat pump. It is factory set to open (trip) at 3.2 MPa and reset at 4.4 MPa, shutting down the compressor before dangerously high refrigerant pressures can cause mechanical damage or a fault code lockout. A failed or faulty switch can result in nuisance trips or, conversely, an unprotected compressor — making timely replacement essential.

Compatibilità

Designed specifically for the Hydro-Pro Type P On/Off heat pump range, including the P6/32 model (5.81 kW, R32 refrigerant). Always cross-reference your unit’s model number and the part number on your existing switch before ordering, as pressure switch ratings and connector types can vary across the Hydro-Pro heat pump range.

Perché l'originale conta

Using a genuine Hydro-Pro high pressure switch ensures the correct trip and reset pressures are maintained, preserving compressor warranty coverage and safe operation. Third-party substitutes with mismatched pressure ratings can leave the compressor unprotected or cause unnecessary shutdowns, leading to costly repairs.