Fluidra - Return Inlet Fixing Nut with Gasket for Panel Pools

Fluidra – Return Inlet Fixing Nut with Gasket for Panel Pools

This is the genuine Fluidra replacement fixing nut with integrated gasket for the Multiflow return inlet used in panel pools. The nut threads onto the rear of the inlet body, clamping it securely through the pool panel wall while the gasket creates a watertight seal — preventing leaks at the point of installation.

Compatibilità

This fixing nut with gasket is a spare part for the Fluidra AstralPool Multiflow return inlet (ref. 33091) designed for panel pools with a wall thickness of 10 to 15 cm. It is not intended for concrete, fibreglass or liner pools that use different inlet assemblies — always verify your inlet model before ordering.

Perché l'originale conta

Using a genuine Fluidra part ensures the nut thread pitch, outer diameter and gasket compound match the original tolerances exactly. Off-brand equivalents may fit loosely or use inferior gasket materials that degrade quickly in chlorinated water, leading to leaks or premature failure of the entire inlet assembly.

Installazione

The fixing nut is tightened from the back of the pool panel onto the inlet body, which is inserted from the water side and glued to a Ø 50 mm pipe. Ensure the gasket is seated flat and undamaged before tightening. Hand-tighten first, then snug with a strap wrench — do not over-torque, as ABS threads can crack under excessive force.