Fluidra - Manual Air Purge Valve ¾"

Fluidra – Manual Air Purge Valve ¾”

This is a genuine Fluidra replacement ¾” manual air purge valve for the Fluidra Europe Filter commercial sand filter range. It is fitted to the filter tank to allow trapped air to be safely vented from the system, maintaining correct operating pressure and efficient filtration performance.

Compatibilità

This valve is a direct OEM replacement part for the Fluidra Europe Filter Ø1050 mm, 1.0 m filter bed, rated to 2.5 kg/cm² (≈2.5 bar). The Europe Filter is a polyester and fibreglass commercial-grade sand filter used in public and large private pool installations across Europe. Always verify your filter model and existing valve thread size before ordering.

Perché l'originale conta

Air trapped inside a pressurised sand filter tank can cause pressure spikes and reduce filtration efficiency. A correctly sealing, properly rated air purge valve is essential for safe operation. Genuine Fluidra parts are manufactured to the exact tolerances and pressure ratings of the original equipment, ensuring a reliable seal and long service life — something aftermarket alternatives cannot guarantee.

Installazione

The valve threads directly into the designated ¾” port on the filter tank. Ensure the system is fully depressurised and isolated before removing the old valve. Apply appropriate thread sealant and tighten to the manufacturer’s specification. Commissioning should include a functional check of the purge valve before returning the filter to service. Installation by a qualified pool technician is recommended for commercial filter systems.