Salta al contenuto

Fluidra - Manifold Arm Assembly for Europe Filter Ø2350 mm (1.2 m Bed, 2.5 kg/cm²)

4404160200
Esaurito
381,45  tasse inc.
Certificato Certificato negozio online
Resi facili Resi facili entro 14 giorni
Domanda Cercando consigli?
Fai la tua domanda

Fluidra – Manifold Arm Assembly for Europe Filter Ø2350 mm (1.2 m Bed, 2.5 kg/cm²)

This is a genuine Fluidra manifold arm assembly designed as a direct replacement for the internal lateral collector system of the Fluidra Europe Filter with a 2350 mm tank diameter, 1.2 m filter bed depth, and a working pressure rating of 2.5 kg/cm². The manifold arm sits at the base of the filter tank, collecting filtered water from the sand bed and directing it to the outlet during normal filtration, while also distributing backwash water evenly across the bed during cleaning cycles.

Compatibilità

This part is specifically sized for the Fluidra Europe Filter Ø2350 mm with a 1.2 m sand bed and a maximum operating pressure of 2.5 kg/cm² (approx. 2.5 bar). The Europe Filter range is a large-format commercial fiberglass sand filter available for flow rates of up to 108–152 m³/hr at the 2350 mm diameter. Always verify your filter’s tank diameter, bed height, and pressure rating against your unit’s documentation before ordering, as manifold arm dimensions vary across the Europe Filter range.

Perché l'originale conta

As an OEM Fluidra part, this manifold arm assembly is manufactured to the exact tolerances of the original component, ensuring a secure fit within the tank and consistent hydraulic performance across both filtration and backwash modes. Aftermarket substitutes may not match the slotted geometry or pipe dimensions needed for correct flow distribution, risking channelling through the sand bed and reduced filtration efficiency.

Installazione

Replacement requires draining and opening the filter tank to access the internal collector assembly. The manifold arm connects to the central collector hub at the base of the filter. Given the large format and pressurised nature of this commercial filter, installation should be carried out by a qualified pool technician, with all connections checked for correct seating and the system pressure-tested before returning to service.

Informazioni aggiuntive

Filtro compatibile: Fluidra Europe Filtro Ø 2350 mm
Altezza del letto filtrante: 1,2 m
Pressione massima di esercizio: 2,5 kg/cm²
Tipo di parte: Manifold arm assembly (lateral collector)
Applicazione: Filtrazione a sabbia per piscine commerciali

In dettaglio

  • Genuine OEM part — guaranteed fit for Europe Filter Ø2350 mm
  • Restores correct filtration and backwash flow distribution
  • Built to withstand 2.5 kg/cm² operating pressure
  • Precise slotted geometry prevents sand bypass
  • Sostituzione diretta a parità di modello — non sono necessarie modifiche
  • Sized specifically for Ø2350 mm — not cross-compatible with other diameters
  • Per questo filtro commerciale si raccomanda vivamente di rivolgersi a un installatore professionista