With up to 45 minutes of runtime on a single lithium-ion charge and a 7.5-inch vacuum head covering approximately 1,150 sq ft per hour, the Volt FX-4 Li is a capable hand-held vacuum for spas, above-ground pools, and medium-sized in-ground pools alike. Completely independent from your pool’s main filtration system, it requires no hoses, no cords, and no plumbing connections whatsoever. The unit recharges fully in around 4 hours via the included wall charger \u2014 an EU adapter is supplied in the box.<\/p>\n
The 7.5-inch vacuum head, fitted with soft-bristle scrubbing brushes, sweeps dirt, sand, gravel, leaves, and algae from pool floors and walls. Two reusable filter bags are included: a fine Xtreme multi-layer bag for silt and fine debris, and an all-purpose bag for larger material \u2014 so you can match filtration to the mess without purchasing consumables. Remove the vacuum head entirely to expose the nose-cap nozzle and the unit instantly becomes a precision spot-cleaner, able to reach corners and crevices that wider heads cannot access.<\/p>\n
Weighing just 1.54 kg, the Volt FX-4 Li can be used by hand or clipped to any standard telescopic pool pole (not included) for full-pool coverage without getting in the water. The built-in push-button on\/off switch and smart charger \u2014 which turns from red to green when the battery is full \u2014 keep operation straightforward for pool owners and guests alike. A minimum operating depth of 12.25 inches at a 45-degree angle means it works in the shallow end and in spa basins without issue.<\/p>\n
Because the Volt FX-4 Li carries its own power source and integrated filtration, it is equally at home on above-ground pools, soft-sided pools, in-ground pools, hot tubs, fountains, and portable spas. No bypass valves, no backwash cycles, and no priming are required \u2014 simply charge, attach to a pole if desired, and vacuum.<\/p>","protected":false},"excerpt":{"rendered":"