This page provides the official exploded-view diagram and full bill of materials for the Hydro-Pro Heat Pump, Type P On\/Off, model P14\/32, carried under factory reference 7024527<\/strong>. The P14\/32 is a single-phase, on\/off pool heat pump rated at 13.5 kW heating capacity (at A27\/W27 conditions), designed for in-ground and above-ground pools and suited to pool volumes of approximately 50\u201368 m\u00b3. The diagram covers every major assembly \u2014 from the refrigerant circuit and electrical box through to the enclosure panels and water-side components. Work through the numbered call-outs below and you will be able to pinpoint the exact part you need within minutes.<\/p>\n Every call-out number printed on the exploded-view diagram corresponds directly to a numbered row in the parts list table below the diagram. The most efficient way to find your part is to start by identifying the area of the unit that concerns you \u2014 for example, the refrigerant circuit, the electrical box, or the fan assembly \u2014 then locate the relevant call-out number in that zone of the drawing. Once you have the number, find the matching row in the table to confirm the description and, where stocked, the SKU you need to add to your basket. Bear in mind that a single position number can appear in more than one location on the drawing: common fasteners and fittings are sometimes shared across several sub-assemblies, so always read the part description carefully to be sure it matches what you see on your unit. Pay particular attention to lettered variants \u2014 position 30 in this diagram splits into 30a<\/strong> \u00e9s 30b<\/strong>, which are two distinct controller part numbers for different unit configurations; ordering the wrong letter variant will result in an incompatible board. Parts shown in the diagram without a SKU in the table are either structural panels or refrigerant-circuit components that are not supplied as individual service parts; if you need one of those items, please contact us before ordering. Finally, note that some rows in the BOM bundle accessories or sensors alongside the primary part \u2014 read the full description text, not just the position number, to make sure you are selecting the correct item.<\/p>\n The refrigerant circuit forms the core of the unit and contains the components most likely to require service attention. Position 1<\/strong> is the titanium heat exchanger (SKU 7024876), which transfers heat from the refrigerant to the pool water; titanium construction makes it resistant to chlorinated and salt-treated water. The high-pressure switch at position 2<\/strong> (SKU 7011008, rated 3.2 MPa \/ 4.4 MPa) and the low-pressure switch at position 6<\/strong> (SKU 7011009, rated 0.3 MPa \/ 0.15 MPa) are the two pressure-safety devices that protect the refrigerant circuit; both are individually stocked and straightforward to replace. Position 5<\/strong> is the 4-way reverse valve, which governs the direction of refrigerant flow and enables the heat-pump cycle. The compressor at position 12<\/strong> (model LV32VTAMC) is the heart of the refrigerant loop; this is not currently stocked as a standalone spare, so contact us if compressor replacement is required. On the air side, position 16<\/strong> is the axial fan motor (80 W, YDK80-6, SKU 7024872), and position 13<\/strong> is the matched 500 mm \u00d7 145 mm, 10 mm bore anticlockwise fan blade (SKU 7024880) \u2014 these two are closely related and should be verified together when diagnosing air-flow faults. Position 27<\/strong> is the water flow switch with 32 mm glue adapter (SKU 7006471), which prevents the unit running without adequate water flow. The electrical box (position 19<\/strong>) houses several individually serviceable components: the PC 1001 controller boards at position 30a\/30b<\/strong>, the 60 \u00b5F round AMP capacitor at position 24<\/strong> (SKU 7010433), the 5 \u00b5F square plug-in capacitor at position 31<\/strong> (SKU 7010418), the 2-way wire connector at position 29<\/strong> (SKU 7011019), and the 5-way wire connector at position 32<\/strong> (SKU 7011025). The user interface is the LCD touch-screen display assembly with Wi-Fi at position 8<\/strong> (SKU 7016596), which mounts on the front of the cabinet. Position 7<\/strong> is the Hydro-Pro+ Premium needle valve (brass, SKU 7006466), fitted within the refrigerant circuit, and position 22<\/strong> is the top lid (1115 \u00d7 430 mm, SKU 7033048), which can be replaced if the enclosure is damaged.<\/p>\n The most important variant decision on this diagram is at position 30<\/strong>, where the controller splits into two distinct options: 30a<\/strong> (SKU 7027825) is the PC 1001 controller specified specifically for the P14\/32 unit, while 30b<\/strong> (SKU 7026538) is the same controller board in a non-P14\/32 configuration \u2014 the factory references printed on the two boards differ, and fitting the wrong variant can result in incorrect sensor calibration or control behaviour, so confirm your unit’s factory reference (7024527 for the P14\/32) before ordering. Similarly, the two pressure switches at positions 2<\/strong> \u00e9s 6<\/strong> carry different trip-point ratings (3.2 MPa \/ 4.4 MPa for the high-pressure switch versus 0.3 MPa \/ 0.15 MPa for the low-pressure switch) and are not interchangeable despite looking similar in the diagram \u2014 always match the SKU to the position number. The two capacitors at positions 24<\/strong> \u00e9s 31<\/strong> also differ in capacitance, physical format, and connector type (60 \u00b5F round AMP versus 5 \u00b5F square plugged), so verify both the \u00b5F rating and the connector style against the label on the original component before purchasing a replacement.<\/p>","protected":false},"excerpt":{"rendered":"Hogyan lehet a sz\u00e1mozott \u00e1bra seg\u00edts\u00e9g\u00e9vel megtal\u00e1lni az alkatr\u00e9szt?<\/h3>\n
Main replaceable assemblies on the Hydro-Pro Type P On\/Off (P14\/32)<\/h3>\n
A v\u00e1ltozatok \u00e9s a csomagm\u00e9retek k\u00f6z\u00f6tti v\u00e1laszt\u00e1s<\/h3>\n