This is the genuine O-ring gasket that seals the junction between the floating cable connector and the motor block on the Zodiac Vortex 3 Saphir robotic pool cleaner. Measuring 21\u00d72 mm, it sits in the groove on the motor-block side of the connection and prevents pool water from ingressing into the electrical interface. Without an intact seal at this point, water can track along the connector and cause irreversible damage to the motor block electronics.<\/p>\n
The gasket seats on the motor-block receptacle where the floating supply cable plugs in. When the connector is pushed home, the O-ring compresses to create a watertight barrier around the cable entry port. This is a safety-critical seal: even minor deformation or cracking will compromise the IP rating of the whole drive unit and may result in motor block failure or nuisance tripping of the transformer.<\/p>\n
This part is confirmed for the Zodiac Vortex 3 Saphir (W9300) and is also referenced for the Zodiac Vortex 4. It is only required where the cable connector is not an over-moulded rubber type; over-moulded connectors have a silicone seal integrated into the plug body and do not use a separate O-ring at the block.<\/p>\n
Replace this gasket if you notice water inside the motor block housing after a cleaning cycle, if the O-ring is visibly flattened, cracked, or has lost its round cross-section, or if the cable connector feels loose in the block port. Routine inspection at each season start is recommended, as the constant thermal cycling and chlorinated-water exposure degrade rubber compounds over time.<\/p>\n
Zodiac specifies this O-ring to an exact 21\u00d72 mm cross-section and a rubber compound formulated to resist chlorinated and salt water. An undersized or inferior-material substitute will not exert the correct compression load in the groove, leaving a potential leak path. Using a genuine Zodiac part ensures the fit, shore hardness, and chemical resistance are exactly as the motor block was engineered to accept.<\/p>","protected":false},"excerpt":{"rendered":"