Norsup vezérlőegység, Norsupone V2 (V2.04) típus – robbantott ábra és pótalkatrészek

Norsup Control Unit, Type NorsupOne V2 (V2.04) exploded view & spare parts

This page presents the official exploded-view diagram and bill of materials for the Norsup Control Unit, Type NorsupOne V2, firmware revision V2.04, manufactured under factory reference 7037851-ev329. The NorsupOne V2 is the central control enclosure that brings together all of a pool’s major equipment — filtration, heating, dosing, and lighting — into a single managed system. Each numbered call-out in the diagram corresponds directly to a genuine Norsup spare part or sub-assembly listed in the table below. If you have the unit in front of you, you should be able to identify the part you need within a few minutes.

Hogyan lehet a számozott ábra segítségével megtalálni az alkatrészt?

Start by locating the physical area of the control unit where the fault or wear has occurred — for example, the circuit-protection section, the power-supply bay, or the enclosure hardware. Next, find the corresponding numbered call-out in the exploded-view diagram; each number is printed adjacent to the component or its leader line. Once you have the position number, match it to the row in the parts list below to obtain the SKU you need to order. Bear in mind that some position numbers point to more than one part: position 2, for instance, covers the RCBO (SKU 7039108) as well as two separate MCB variants (SKU 7039109 for B6A and SKU 7039110 for B10A) — you must choose the variant that matches the breaker rating currently fitted in your unit. Where a position carries lettered or numbered sub-variants, the diagram will usually show them labelled as separate call-outs or with a suffix (for example 3.1 / 3.2), so read the legend carefully before placing an order. A handful of positions — such as position 15, the USB cable — carry no SKU in this revision of the diagram, which generally means the item is either sourced separately or available on request; contact us if you are unsure. Always cross-reference the position number, the written description, and the SKU together rather than relying on any single column alone, as part descriptions can be abbreviated on the diagram itself.

A NorsupOne V2 legfontosabb cserélhető alkatrészei

The heart of the NorsupOne V2 enclosure is the PCB NorsupOne V2 at position 1 (SKU 7036778). This main printed circuit board carries the controller logic, sensor inputs, and equipment outputs; it is the component most likely to require replacement following a surge event or firmware-related hardware fault. Circuit protection is handled at position 2, which houses the RCBO B32A (SKU 7039108) — the primary residual-current breaker with over-current protection — supported by dedicated MCBs at sub-positions 3.1 and 3.2 for lower-current branch circuits. Low-voltage power to the controller logic is provided by two components working in tandem: the Transzformátor at position 6 (SKU 7038353), which steps mains voltage down, and the 24 V DC power supply at position 7 (SKU 7038909), which delivers regulated direct current to the PCB and connected sensors. Position 7 also notes the availability of a set of hanging brackets (four pieces per set, SKU 7038257), used to mount the power supply securely within the enclosure. Enclosure access and weatherproofing are served by position 27, the Key (SKU 7038306) for the cabinet lock, and position 28, the Rubber set (SKU 7038258), which comprises the sealing gaskets that maintain the enclosure’s ingress-protection rating. Position 15 lists the USB cable used for firmware update or configuration purposes, though no SKU is assigned in the current bill of materials.

A változatok és a csomagméretek közötti választás

The most important variant decision on this diagram concerns position 2 and its sub-positions. The RCBO at position 2 (SKU 7039108) is rated B32A and protects the overall installation; the MCB at sub-position 3.1 (SKU 7039109) is a B6A device, while the MCB at sub-position 3.2 (SKU 7039110) is a B10A device. Before ordering, check the rating printed on the body of your existing breaker — fitting a breaker with the wrong current rating will either cause nuisance tripping or, more critically, fail to provide adequate protection for the connected load. For position 7, note that the hanging brackets (SKU 7038257, sold as a four-piece set) are listed alongside the 24 V DC power supply (SKU 7038909) but carry a separate SKU, so if your brackets are damaged while the power supply itself is still serviceable, you can order the hardware set independently. The rubber sealing set at position 28 is supplied as a complete kit; always replace the full set rather than individual gaskets to maintain a reliable seal across the enclosure door and cable entries.