Maytronics Dolphin Supreme M5 Bio PVC tápegység szűrőjelzővel és heti időzítővel – 9995678-ASSY

Maytronics Dolphin Supreme M5 Bio PVC tápegység szűrőjelzővel és heti időzítővel

This is the genuine Maytronics switch-mode power supply unit designed for the Dolphin Supreme M5 Bio, delivering 180 W of regulated DC output to drive the robot’s dual motors and onboard electronics. It integrates a full filter bag indicator and a programmable weekly timer directly into the unit, putting scheduling and maintenance alerts at your fingertips from poolside.

What this power supply does in the Dolphin

The PSU converts mains AC to the low-voltage DC the Supreme M5 Bio requires, managing motor speed and cleaning cycle duration. The filter indicator uses a sensor-driven LED to signal when the filter cartridge is loaded and needs cleaning, so you don’t run the robot blind. The weekly timer lets you programme a recurring start day and time, firing the robot automatically without manual intervention each cycle.

Which Dolphin models it fits

This unit is the correct replacement for the Supreme M5 Bio and fits across the broader Supreme M4/M5 family, as well as the Dolphin Bio, Premier, Apollo, Apollo Plus, Edge, DX4, DX4S, DX5S, DX6, Wave 50, Wave 75, Neptune Plus, Heavy Duty, Triton Plus (older model), and M400 (older model). It is not compatible with the current M400, Triton PS, Triton PS Plus, Proteus DX4, or Proteus DX5 — verify your robot’s model number before ordering.

Signs it needs replacing

Replace this PSU if the robot fails to power on despite a sound cable and connectors, if the filter indicator LED no longer illuminates or gives erratic readings, or if the weekly timer resets unexpectedly or fails to trigger scheduled cycles. A PSU that runs noticeably hot to the touch or emits an electrical smell should be replaced immediately.

Miért fontos a eredeti Maytronics?

Counterfeit and grey-market power supplies for this platform are common: they replicate the housing but routinely use undersized capacitors and lack the correct over-voltage and over-current protection circuits the Supreme M5 Bio’s motor controller expects. A non-genuine unit can damage the robot’s drive board. This is an OEM assembly manufactured to Maytronics specification, with the correct 180 W output rating and calibrated filter-indicator threshold.