Maytronics Dolphin Cainan 1 első kerék, lila, BL217 – 99834105

Maytronics Dolphin Cainan 1 front wheel purple BL217

This is the genuine Maytronics replacement front wheel for the Dolphin Cainan 1 robotic pool cleaner, identified by colour code BL217 (purple). Positioned at the front of the chassis, the wheel guides the robot across the pool floor and up the walls, maintaining straight, predictable travel lines throughout each cleaning cycle. Replacing a worn or damaged front wheel restores the robot’s mobility and directional accuracy immediately.

Feladata és szerepe a hajtásrendszerben

The front wheel works in concert with the Cainan 1’s rear drive tracks to stabilise the robot and reduce drag as it navigates pool surfaces. It bears the forward load during climbing manoeuvres on walls and steps, so intact geometry is essential for consistent wall coverage. A cracked or seized front wheel causes the unit to veer off course, scrub unevenly, or stall mid-cycle.

Kompatibilitás

This part is designed specifically for the Maytronics Dolphin Cainan 1 (part reference BL217). The Dolphin Cainan 1 is a compact, lightweight robotic cleaner suited to pools up to 10 metres in length, covering both the floor and walls. Always confirm your robot’s model reference before ordering, as front wheels across the Dolphin range differ in diameter, hub geometry, and colour coding.

A csere szükségességét jelző tünetek

Replace the front wheel if you observe the robot drifting or circling rather than travelling in straight passes, if the wheel visibly wobbles on its axle, if there is cracking or chunking of the wheel body, or if the unit struggles to climb walls and returns repeatedly to the pool floor. Catching wear early prevents additional stress on the drive motor and tracks.

Miért fontosak a Maytronics eredeti alkatrészei?

Genuine Maytronics wheels are moulded to exact dimensional tolerances, ensuring the correct axle fit and the right rolling resistance for the Cainan 1’s motor load. Third-party alternatives frequently vary in hub bore diameter and material hardness, leading to premature failure or accelerated wear on the axle shaft. Using a genuine part also keeps the robot within its manufacturer service warranty.