Fluidra - Sena SS Pump Impeller 0.75 HP 60 Hz (from May 2024) - 4405011447

Fluidra – Sena SS Pump Impeller 0.75 HP 60 Hz (from May 2024)

This is the genuine Fluidra replacement impeller for the Sena SS 0.75 HP single-phase (II) pool pump running at 60 Hz. The impeller is the rotating hydraulic component at the heart of the pump, responsible for drawing water in and pushing it through the filtration circuit. This specific part is designed for Sena SS units manufactured from May 2024 onwards, reflecting a design revision introduced at that production date.

Kompatibilitás

This impeller is compatible exclusively with the Fluidra Sena SS 0.75 HP 60 Hz single-phase (II) pump — specifically units produced from May 2024 onward. It is not interchangeable with earlier production versions of the same pump, nor with the three-phase (III) variant, or other Sena SS power ratings (1 HP, 1.25 HP). Always verify your pump’s production date and model code before ordering.

Miért fontos az eredetiség?

Using a genuine Fluidra OEM impeller ensures the correct hydraulic profile, dimensional tolerances, and material specification for your pump. An incorrect or aftermarket impeller can reduce flow rate, increase wear on the mechanical seal and pump body, and void any remaining warranty on your Sena SS pump. Genuine parts are manufactured to the same standards as the original components fitted at the factory.

Telepítés

Replacing the impeller requires draining and dismantling the pump wet end, including removal of the pump body and diffuser. The impeller is secured to the motor shaft — correct fitment and torque are essential to prevent vibration and premature seal failure. Installation by a qualified pool technician is strongly recommended to ensure safe and correct reassembly.