Fluidra - Sand Filter Base Foot Ø1050 mm

Fluidra – Sand Filter Base Foot Ø1050 mm

This is the genuine Fluidra replacement base foot for commercial sand filter tanks with a 1050 mm tank diameter and a rated flow of 43,000 l/h. The base foot is the structural support component mounted beneath the filter tank, keeping it level, stable, and correctly elevated above the plant room floor. Replacing a cracked or damaged foot restores the safe, upright positioning essential to reliable filter operation.

Kompatibilitás

This base foot is designed for Fluidra commercial sand filters with a Ø1050 mm tank, including models within the Praga and Florida filter ranges rated at 43,000 l/h. Always verify your filter’s tank diameter and model reference before ordering, as filter feet are diameter-specific and not interchangeable between tank sizes.

Miért fontos az eredetiség?

As a genuine Fluidra OEM spare part, this base foot is manufactured to the exact dimensional tolerances of the original component, ensuring a flush, secure fit under the filter tank. Aftermarket alternatives may differ in bolt-hole spacing, footprint, or load-bearing capacity — risks not worth taking on a pressurised commercial filtration vessel.

Telepítés

The base foot is typically bolted directly to the underside of the filter tank shell and should be installed on a flat, level concrete or tiled surface. On large-diameter commercial filters, it is advisable to have a qualified pool technician carry out the replacement, as the tank must be safely supported or emptied during the procedure.