Astralpool Xtreme 2 and Xtreme 3 pump motor (PPE) – Turbo robotic pool cleaner replacement - SA69019

Astralpool Xtreme 2 and Xtreme 3 pump motor (PPE) – Turbo robotic pool cleaner replacement

This is the genuine Astralpool PPE pump motor for the Xtreme 2 (Turbo) robotic pool cleaner, also compatible with the Xtreme 3. The pump motor is the hydraulic heart of the robot: it drives water through the filtration circuit, generating the suction flow that lifts debris from the pool floor and walls into the filter bag. Without a correctly functioning pump motor, the robot loses suction, stalls mid-cycle, or stops cleaning altogether.

Function and role in the robot

The PPE pump motor is a self-contained submersible unit responsible for all water movement inside the Xtreme 2 and Xtreme 3 Turbo robots. It draws pool water in through the inlet, forces it across the filter media, and expels clean water back into the pool. The motor runs on low-voltage DC power supplied by the transformer unit, keeping the entire drive train within safe submersible operating limits.

Kompatibilis modellek

This pump motor is listed as an original spare part for the Astralpool Xtreme 2 Turbo (model 49798) and is cross-compatible with the Xtreme 3 (model 49799). Always verify your robot’s model label before ordering to confirm fitment.

Symptoms that indicate replacement is needed

Common failure signs include the robot completing a cycle without picking up debris, noticeably weak or absent suction, the unit shutting down shortly after starting, or the robot failing to climb walls due to insufficient water flow. A seized or burnt-out pump motor may also produce an unusual humming noise or cause the control unit to display an error. If the drive (traction) motor is confirmed serviceable but suction remains absent, the pump motor is the prime suspect.

Why genuine Astralpool matters

Aftermarket pump motors can differ in winding specification, impeller geometry, and shaft sealing, leading to premature failure or voided warranty. A genuine Astralpool replacement motor is manufactured to the exact electrical and mechanical tolerances of the original, ensuring correct flow rate, safe DC operating voltage, and a leak-free seal around the submersible shaft — critical for any component that operates continuously underwater.