Designed for large-bore pipework, this 125 mm (\u00d8Di) PVC-U elbow delivers a precise 90\u00b0 directional change with a centre-to-socket depth (Cb) of 135 mm on both legs, and is pressure-rated to 16 bar \u2014 making it well suited to commercial pool plant rooms, high-flow filtration headers, and industrial water systems where robust, permanent pipe joints are required.<\/p>\n
Both sockets accept standard metric PVC-U pipe via solvent cement (glue socket), forming a fully rigid, leak-free joint. All glue connections conform to EN-ISO 1452-3, the European standard for unplasticised PVC pressure piping systems, ensuring compatibility with other metric PVC-U fittings and pipework across the range.<\/p>\n
Moulded from unplasticised PVC (PVC-U) in a neutral grey finish, the elbow offers excellent resistance to chlorinated water, common pool chemicals, and a wide range of industrial fluids. PVC-U does not corrode, scale, or support biological growth, making it a long-service-life choice for buried, encased, or plant-room pipework installations.<\/p>\n
At 125 mm internal diameter, this elbow is intended for large commercial or semi-commercial pool plant rooms, water treatment systems, or irrigation mains where high volumetric flow rates demand full-bore pipework. It pairs directly with standard DN125 metric PVC-U pipe and the wider Profec 16 bar fitting range \u2014 including tees, reducers, and couplings \u2014 to allow complete system builds from a single product family.<\/p>","protected":false},"excerpt":{"rendered":"