This pack of 50 genuine Water-ID powder pillows provides the sea-water conditioning reagent required when testing ammonia (low range, 0\u20131 mg\/l) in saltwater or salt-electrolysis pools using the PoolLab 2.0 photometer. The conditioning pillow is used alongside the Ammonia N\u00b01 and N\u00b02 powder pillows to neutralise the interfering matrix of high-salinity water and ensure accurate photometric readings. Elevated ammonia in pool water is a key indicator of bather load, sanitation failure, or nitrogen-cycle imbalance, and requires prompt corrective action.<\/p>\n
These powder pillows are designed exclusively for use with the Water-ID PoolLab 2.0 photometer and must be used as part of the full ammonia low-range test sequence \u2014 together with Ammonia N\u00b01 (PPHAM150) and Ammonia N\u00b02 (PPPAM250) powder pillows. They are not interchangeable with reagents for other photometer brands or models. If residual chlorine is present in the sample, a Dechlor tablet must be added to the sample before testing to prevent interference.<\/p>\n
The PoolLab 2.0 photometer is calibrated to the specific optical response of genuine Water-ID photometer-grade reagents. Using non-genuine or rapid-grade reagents will produce incorrect measurement results. All Water-ID powder pillows are produced, blistered, and packaged in Germany to strict quality standards, ensuring lot-to-lot consistency and photometer-grade accuracy every time.<\/p>\n
Add 10 ml of your sea-water or salt-pool sample to the cuvette using the supplied syringe. Follow the PoolLab 2.0 ammonia test sequence: add the conditioning powder pillow first to neutralise salt matrix interference, then add Ammonia N\u00b01 and Ammonia N\u00b02 powder pillows in order, stirring between each addition. Wait for the countdown to complete, then confirm the result on the photometer display. Clean the cuvette thoroughly after each measurement. Store unused powder pillows in a cool, dry place away from heat and humidity.<\/p>","protected":false},"excerpt":{"rendered":"