Aller au contenu

Poignée pour robot nettoyeur de piscine Zodiac XA iQ – rouge - R0901500

Zodiaque R0901500
1 à 3 semaines
30,45  impôts inc.
Expédition Expédition 1 à 3 semaines
Certifié Certifié boutique en ligne
Retours faciles Retours faciles dans les 14 jours
Pièce de rechange Vous cherchez une pièce de rechange ?
Aller à la vue éclatée
Question Cherchez-vous des conseils ?
Posez votre question

Zodiac XA iQ robot pool cleaner handle – red

This is the genuine Zodiac replacement carry handle for the XA iQ series of robotic pool cleaners, moulded in red to match the original top-shell livery. Fitted to the top of the robot body, it is the primary lifting point used every time the unit is retrieved from the pool, drained and transported to its storage caddy.

Function and daily use

Every cleaning cycle ends with the operator gripping this handle to lift the robot clear of the water. A secure, correctly seated handle transmits the full weight of a water-laden unit — typically several kilograms — without flexing or slipping, protecting both the operator and the robot’s internal wiring harness from shock loads. A cracked, loose or deformed handle should be replaced before the next retrieval to avoid dropping the cleaner.

Compatibilité

This part is the direct OEM replacement for the Zodiac XA 4010 iQ, XA 4030 iQ, XA 4045 iQ and XA 4095 iQ robotic pool cleaners. These models share a common top-shell architecture across the XA iQ generation, meaning the handle mounting points, clip geometry and colour specification are identical across all four variants.

Signs that the handle needs replacing

Replace this handle if you notice visible cracking or stress-whitening at the pivot roots, if the snap-fit clips no longer lock positively into the shell, or if the handle rocks noticeably under load. UV exposure and repeated pool-chemical contact degrade the polymer over time, making proactive replacement a straightforward precaution at any seasonal service.

Pourquoi l'authenticité est importante

A Zodiac OEM handle is manufactured to the exact wall-thickness, polymer grade and clip-retention specification that Zodiac engineers validated for safe retrieval loads. Aftermarket alternatives often use a softer or more brittle resin that can fail suddenly under the dynamic loading of lifting a dripping robot. Fitting a genuine part also keeps your robot’s service history clean and preserves any remaining warranty entitlement.

Informations complémentaires

Marque : Zodiaque
Type : Carry handle
Couleur : Rouge
Compatible avec : Zodiac XA 4010 iQ, XA 4030 iQ, XA 4045 iQ, XA 4095 iQ
Matériau : Moulded polymer
Comprend : 1 × handle assembly
Référence de la pièce Zodiac : R0901500

Cette pièce de rechange est compatible avec :