Maytronics - Dolphin EasyKleen side flange - 9982323

Maytronics Dolphin EasyKleen side flange

This is the OEM side flange for the Maytronics Dolphin EasyKleen robotic pool cleaner, supplied as an individual replacement component (part of assembly 9982315). The side flange is a structural interface piece mounted on the lateral face of the robot chassis, providing the rigid mating surface that locates and secures adjacent side panels or drive components in precise alignment.

What this side flange does in the Dolphin EasyKleen

The side flange acts as a load-bearing connector point on the outer shell of the EasyKleen chassis. It distributes mechanical stress across the joint between the side body panel and the internal frame, keeping the robot’s outer structure rigid during floor contact and directional changes. Without a correctly seated flange, side panels can flex, misalign, or detach — degrading both cleaning performance and watertight integrity.

Sur quels modèles Dolphin est-il compatible ?

This flange is confirmed for the Maytronics Dolphin EasyKleen (model reference 99996001). It is not a universal Dolphin component — flange geometry is model-specific. Verify your robot’s model number on the label on the underside of the chassis before ordering.

Signes indiquant qu'il faut le remplacer

Inspect the side flange if you notice the side panel on your EasyKleen shifting, rattling, or sitting proud of the chassis surface. Visible cracking, a chipped mounting lip, or stripped screw seats on the flange face are reliable indicators that the part has reached end of service life. A deformed flange will prevent the side assembly from closing flush, which can allow debris ingress around the seam.

Comment l'installer

Access requires removing the side panel of the EasyKleen — typically a straightforward task involving a few crosshead screws. Detach the damaged flange from its mating points, align the replacement to the chassis locating pins, and fasten in reverse order. No specialist tools are required beyond a crosshead screwdriver. Refer to your EasyKleen service diagram for the correct torque sequence if multiple fasteners are involved.