Maytronics Dolphin E20, roue avant, gris clair - 99834102

Maytronics Dolphin E20 front wheel light grey

This is the genuine Maytronics replacement front wheel for the Dolphin E20 robotic pool cleaner. Mounted at the front of the chassis, the wheel works in concert with the drive tracks to support, guide and stabilise the robot as it navigates pool floors, walls and waterlines. Worn or loose wheels are a leading cause of track ejection and erratic movement — replacing them promptly restores correct drive-train tension and full cleaning coverage.

Function and role in the drive system

The front wheel acts as the forward idler in the Dolphin E20’s drive assembly. It maintains the correct tension and alignment of the rubber track on its side of the robot, ensuring the track seats firmly around both the wheel and the rear drive sprocket. Without a properly functioning front wheel, the track loses tension, slips off the sprocket hub and the robot can no longer propel itself efficiently across pool surfaces.

Signs that the front wheel needs replacing

The most common failure symptom is a track that repeatedly throws itself off, particularly on one side, even after a new track has been fitted. Close inspection will reveal lateral play or wobble in the wheel on its axle — a sign the wheel bore has worn beyond its design tolerance. Additional indicators include audible clicking or grinding during a cleaning cycle, and visible cracking or deformation of the wheel body caused by prolonged UV and chemical exposure.

Compatibilité

This front wheel is the correct genuine OEM replacement for the Maytronics Dolphin E20 robotic pool cleaner. The SKU 99834102 is a current-production part that supersedes the earlier part number 9983111 across several Dolphin models in the same platform family, including the Active 20, Active 30, S200, S300i, Triton PS, Triton PS Plus, Quantum, Proteus DX5i and Mercury, among others. Always verify against your robot’s parts diagram before ordering.

Pourquoi il est important d'opter pour des produits Maytronics d'origine

Counterfeit and pattern wheels may appear dimensionally identical but are typically moulded from lower-grade polymers that crack under pool chemical exposure or lose their bore tolerance far sooner. A genuine Maytronics wheel is manufactured to the same specification as the original fitment, ensuring correct track tension, full axle engagement and the service life the E20 was designed to deliver. Using genuine parts also preserves any remaining warranty and gives you accurate cross-reference data if further components are needed.