Bloc d'alimentation Maytronics Dolphin C6 CB 180 W avec démarrage différé et indicateur de sac filtrant - 46663R0003

Maytronics Dolphin C6 CB power supply 180W with delayed start and filter bag indicator

This is the genuine Maytronics 180W power supply unit (PSU) for the Dolphin C6 CB robotic pool cleaner, combining two advanced features in a single unit: a programmable two-hour delayed-start function and a filter bag indicator (FBI) that alerts you when filtration requires attention. It converts mains AC input to the low-voltage DC output required to drive the robot’s motors and control electronics throughout every cleaning cycle.

Function and features

The delayed-start function allows the robot to begin its cleaning cycle automatically after a two-hour delay from the moment the PSU is switched on — useful for scheduling off-peak operation or letting swimmers clear the pool first. The filter bag indicator monitors filtration resistance and signals when the bag or cartridge is loaded and needs cleaning, preventing the robot from working against a clogged filter and losing suction performance.

Modèles Dolphin compatibles

This power supply is the correct replacement unit for the Maytronics Dolphin C6 CB. The 180W Delay & FBI family also fits the Dolphin C6, Dolphin C5 PRO, Dolphin Wave 80, Dolphin Wave 100, Dolphin Pro X1, Dolphin Pro X2, and Dolphin DX5. Always verify your robot’s existing PSU part number before ordering to confirm fitment.

Symptoms that indicate the PSU needs replacing

Replace this unit if the power-on button fails to illuminate at all, if the robot receives no power despite a confirmed live mains outlet, if the PSU powers on briefly then cuts out, or if the filter indicator function has stopped responding. A faulty PSU can cause the robot to remain completely stationary even when the drive cable and robot itself are undamaged.

Pourquoi il est important d'opter pour des produits Maytronics d'origine

Genuine Maytronics parts are engineered specifically for Dolphin drive and control electronics, ensuring stable DC output voltage, correct current limiting, and accurate filter-load sensing. Third-party units may deliver incorrect output voltages or lack the FBI signal circuit entirely, risking motor damage and voiding any remaining robot warranty. This unit is supplied directly from Maytronics and is backed by the manufacturer’s standard spare-parts warranty.