Fluidra - Sand Filter Diffuser Assembly Ø140 mm – Europe Filter Ø2000

Fluidra – Sand Filter Diffuser Assembly Ø140 mm – Europe Filter Ø2000

This is the genuine Fluidra replacement diffuser assembly (Ø140 mm) designed for the Europe Filter Ø2000 commercial sand filter rated at 2.5 kg/cm² (2.5 bar). The diffuser sits at the top of the filter tank and evenly distributes incoming water across the entire sand bed, ensuring consistent filtration velocity and maximum filtration efficiency. Replacing a worn or cracked diffuser restores correct flow distribution and protects filter media from channelling.

Compatibilité

This diffuser assembly is specifically sized for the Fluidra Europe Filter with a Ø2000 mm tank diameter, 140 mm connection, 1.0 m filter bed height, and a maximum working pressure of 2.5 kg/cm² (2.5 bar). Always verify your filter’s model reference and diffuser diameter before ordering, as Europe Filter diffuser assemblies are not interchangeable between different tank diameters.

Pourquoi l'authenticité est importante

As a factory-original Fluidra spare part, this diffuser assembly is manufactured to the exact tolerances of the Europe Filter tank, guaranteeing a secure fit and correct hydraulic performance. Aftermarket alternatives may not match the required flow geometry or pressure rating of this large commercial filter, risking poor water quality and premature component failure.

Installation

The diffuser assembly is accessed through the top of the filter vessel. Before replacing, relieve all system pressure and isolate the filter from the pump. Ensure the new diffuser is correctly seated and aligned with the inlet connection before re-commissioning the system. For commercial installations, professional installation by a qualified pool technician is strongly recommended.