Fluidra - Fusible de rechange 2 A pour Elite Connect CellGuard pH 12

Fluidra – Replacement 2A Fuse for Elite Connect CellGuard pH 12

This is the genuine Fluidra replacement 2A fuse (5×20 mm) for the Elite Connect CellGuard pH 12 salt water chlorinator control unit. It is the correct overcurrent protection component specified for the 12 g/h model of the Elite Connect CellGuard range, safeguarding the unit’s internal electronics from power surges or short circuits.

Compatibilité

This fuse is designed specifically for the Fluidra Elite Connect CellGuard pH 12 (12 g/h chlorine output) control unit, which operates at 230 V AC 50/60 Hz. The official Fluidra technical manual specifies a 2A fuse for the 12 g/h model — other models in the range (24, 32, 42 g/h) use different fuse ratings, so always confirm your model before ordering.

Pourquoi l'authenticité est importante

Using a genuine Fluidra fuse ensures the correct current rating and physical dimensions (5×20 mm) are matched exactly to the control unit’s design. An incorrect fuse rating — even slightly higher — can allow damaging overcurrent to reach sensitive electronics, potentially voiding the warranty and causing costly damage to the chlorinator board.

Installation

Fuse replacement is a straightforward task but should be carried out with the unit fully disconnected from mains power. Consult the Elite Connect CellGuard instruction manual and, if in doubt, have a qualified pool technician or electrician perform the swap to ensure safe and correct installation.