Fluidra - Raccord de sortie Ø 75 mm pour filtre Europe Ø 1 050

Fluidra – Outlet Assembly Ø75 mm for Europe Filter Ø1050

This is the genuine Fluidra outlet assembly for the Europe commercial sand filter with a tank diameter of Ø1050 mm and 75 mm pipe connections. It forms the water outlet point of the filter’s internal collector system, channelling filtered water out of the tank and back to the pool circuit at the correct flow rate and pressure.

Compatibilité

This assembly is designed exclusively for the Fluidra Europe Filter Ø1050 mm – 75 mm, 1.0 m filter bed, rated at 2.5 kg/cm². The Europe series is a well-established range of large-format commercial fibreglass sand filters used widely across European public and semi-public pool installations. Always verify your filter’s tank diameter and outlet connection size before ordering, as Fluidra produces outlet assemblies in multiple sizes (75 mm, 90 mm, 110 mm) to match different tank configurations.

Pourquoi l'authenticité est importante

The collector and outlet components inside a commercial sand filter operate under continuous hydraulic pressure and must maintain a leak-free seal to preserve filtration efficiency. A genuine Fluidra part is manufactured to the exact dimensional tolerances, material specification, and pressure rating of the original, ensuring reliable performance up to the filter’s 2.5 kg/cm² working pressure. Third-party alternatives may not match the port geometry or material durability required for this application.

Installation

The outlet assembly is an internal filter component accessed through the filter lid. On a large-format commercial filter such as the Ø1050 model, installation requires depressurising and draining the filter vessel before work begins. Professional installation by a qualified pool technician is strongly recommended to ensure correct seating, torque, and pressure-testing before returning the system to service.