Fluidra - Ensemble diffuseur Ø90 pour filtre européen Ø1050

Fluidra – Diffuser Assembly Ø90 for Europe Filter Ø1050

This is the genuine Fluidra diffuser assembly designed for the Europe Filter with a Ø1050 mm tank and a 90 mm inlet connection, rated to 2.5 kg/cm² (≈2.5 bar). The diffuser is a critical internal component that distributes incoming water evenly across the filter bed, ensuring consistent flow through the filter media and maximum filtration efficiency. It is a direct OEM replacement part, manufactured to the exact tolerances of the original filter specification.

Compatibilité

This diffuser assembly is specifically engineered for the Fluidra Europe Filter Ø1050 mm with a 90 mm connection and a 1.0 m filter bed depth, rated at 2.5 kg/cm². The Europe Filter is a commercial-grade, fibreglass and polyester sand filter widely used in public and large residential pool installations across Europe. Always verify your filter’s tank diameter, inlet size, and pressure rating before ordering to ensure a correct fit.

Pourquoi l'authenticité est importante

Using a genuine Fluidra part guarantees dimensional accuracy, compatibility with the existing manifold and strainer assembly, and full compliance with the filter’s pressure rating. Off-brand diffusers may not seat correctly, leading to uneven water distribution, channelling through the filter media, or premature seal failure. A correctly fitted OEM diffuser protects the integrity of the entire filtration system and helps maintain water clarity.

Installation

Before replacing the diffuser, fully depressurise the filter tank and isolate the system. Carefully remove the existing diffuser, inspect the manifold and strainers for damage, and fit the new assembly ensuring it is correctly aligned and seated. Professional installation by a qualified pool technician is recommended for commercial filter units of this size.