Davey - EcoSalt 13 Replacement Power Supply Unit - M0825CEE-2

Davey – EcoSalt 13 Replacement Power Supply Unit

This is the genuine Davey replacement power supply for the EcoSalt 13 salt water chlorinator (Monarch BMSC 13 series), rated for 13 g/h chlorine output. The power supply is the wall-mounted control and transformer unit that converts mains electricity, drives the electrolytic cell, and houses the control panel for your salt chlorination system. It is typically replaced when the original unit suffers an electrical fault, component failure, or physical damage that cannot be repaired.

Compatibilité

This power supply (Davey part M0825CEE-2) is designed specifically for the EcoSalt 13 / Monarch BMSC 13 salt chlorinator. It is not interchangeable with other EcoSalt output ratings (such as the 20 g/h or 26 g/h models), as each model applies a different voltage to its cell. Always verify your chlorinator’s model label before ordering to ensure a correct match.

Pourquoi l'authenticité est importante

Using a genuine Davey power supply ensures the correct voltage and control signals are delivered to your EcoSalt electrolytic cell. Non-genuine or incompatible power supplies can cause irreversible damage to the cell’s titanium electrode coating and will void your Davey warranty. Genuine parts are designed and tested to operate safely with the EcoSalt cell and its integrated safety flow switch. Please note this part is available while stock lasts and may not be reordered once sold out.

Installation

The power supply must be mounted vertically on a wall or post in a well-ventilated location, within one metre of the filter equipment and no closer than 3 metres from the pool water. It must be kept away from acid fumes and heat sources. All electrical connections must be carried out by a qualified electrician, and the installation must include appropriate earth-leakage (RCD) protection.