BWT - Liner Pool Wall Fitting Body 2" / Ø50 mm - 43000007

BWT – Liner Pool Wall Fitting Body 2″ / Ø50 mm

The BWT wall fitting body (ref. 43000007) is the structural housing that passes through a liner pool wall to create a watertight penetration for a return jet or vacuum/brush connection. It features a flat flange on the pool-facing side that clamps the liner firmly in place, preventing leaks at the wall penetration point. This is the body only — the return jet nozzle or vacuum fitting must be ordered separately.

Compatibilité

Designed for liner pool walls up to 250 mm thick. The rear connection accepts standard 50 mm solvent-weld pipe (female socket), while the pool-side opening is threaded 2″ female to receive a compatible BWT return jet or brush-vacuum fitting. Confirm wall thickness and fitting type before ordering to ensure a complete installation.

Important: Body Only

This product is exclusively the wall fitting body — no jet nozzle, no vacuum fitting, and no brush cap are included. These are sold as separate BWT components. Customers should add the appropriate jet or vacuum fitting to their order to complete the assembly.

Installation

Set the body into the prepared wall opening so the flat liner flange sits flush against the pool-side wall face, then clamp the liner between the flange and the locking ring before connecting the rear pipe with solvent cement. Professional installation is recommended to ensure a lasting watertight seal.